Sport Optics

Forestry Pro

  1. Key Features
  2. Specifications

Descriptions

  • Measurement range: 10-500 m/11-550 yd./33-999 ft.
  • In addition to actual distance, horizontal distance, height, angle and vertical separation (difference in height between two targets) measurement functions, three-point measurement (height between two points) is available
  • The results are displayed on both internal and external LCD panels. The external panel displays all results simultaneously.
  • Target Priority Switch System for measuring overlapping subjects:
    First Target Priority mode displays the distance of the closest subject — useful when measuring the distance to a subject in front of an overlapping background.
    Distant Target Priority mode displays that of the farthest subject — useful in wooded areas.
  • High-quality 6x monocular with multilayer coating produces bright, clear images
  • Long eye relief design affords eyeglass wearers easy viewing
  • Dioptre adjustment function
  • Single or continuous measurement (up to 20 seconds)
  • Waterproof (up to 1 meter for 10 minutes) but not for underwater usage; the battery chamber is water resistant
  • Wide temperature tolerance: -10°C to +50°C

Internal display

  • 1.Actual (linear) Distance
  • 2.Horizontal Distance
  • 3.Height
  • 4.Height between two points
  • 5.Three-point measurement
  • 6.Unit of measure (m/yd.)
    (No unit displayed for ft.)
  • 7.Target mark ()
  • 8.Laser irradiation ()
  • 9.Battery condition
  • 10.Distant Target Priority mode
  • 11.First Target Priority mode
  • 12.Angle
  • 13.Distance

External display

  • 1.Measurement unit (m/yd./ft.)
  • 2.Height
  • 3.Actual (linear) Distance
  • 4.Horizontal Distance
  • 5.Angle (º)

Measurement example (Three-point measurement: height between two points)

When three-point measurement is achieved, the height between points 2 and 3 is displayed on the internal LCD with Hor Hgt+Hgt2 (solid), and Hgt(2) and Ang(2) are shown on the external LCD. Points 2 and 3 can be reversed.

Measurement example (two-point height measurement)

When the measurement is successful, you see the height from the base to the top displayed on the internal LCD with Hgt+Hgt2 (solid).
For more information, refer to the external LCD.
"Base" and "Top" can be switched.